CONTACT

---

MTM 15-35 kW  GT

Sealed  combustion chamber with burner TURBO FAN

Heater - universal oil MTM 15-35 GT  is designed for heating industrial spaces outside the central heating system,
 such as basements,garages,
 workshops,
 warehouses,
 industrial buildings,
 farm buildings etc. 
Type of fuel that can be used in the heater: - Vegetable oils (BIOFUELS) - Waste vegetable oils  (from restaurants and catering) - Mineral and synthetic oils
 (used oil engine, transmission, hydraulic, power of HBO I, II, III, with a viscosity of not more than SAE80) 

Heat output: (with  good insulation) MTM heater efficiently heats a space of upto 1000 cubic meters. 
Characteristic of the heater :
- Variable power from 15kW to 35 KW 
CLOSED COMBUSTION CHAMER with FAN
51210  to 119425   BTU (th)/hour [Btu(th)/h]- Protection against overheating - Overflow protection of oil in the furnace - Built-in microprocessor controller - Traffic lights with LEDs furnace defects - Aesthetic cover with powder coating - Combustion chamber (3 years warranty*) made of stainless steel 
High temperature resistance

- Manual ignition - Warm air outlet temperature 50°C to 70°C  (From the inside air temperature about 12°C) - Radiant heat in all directions - TURBINE FAN INSIDE TOP COVER !!!
- Air flow 1000 cubic m / h - Oil consumption 1.5 l / h to 2.9 l / h - Tank capacity 50l - Weight 100 kg 
Length 90 cm: Width 58 cm : Height 139 cm

 Heater  MTM 17-33 is designed for heating industrial spaces outside the central heating system, such as garages, workshops, warehouses, industrial buildings, farm buildings etc. 
Type of fuel that can be used in the heater: - Vegetable oils (BIOFUELS) - Waste vegetable oils  (from restaurants and catering) - Mineral and synthetic oils (used oil engine, transmission, hydraulic, power of HBO I, II, III, with a viscosity of not more than SAE80) 
Heat output: (with  good insulation) MTM heater efficiently heats a space of upto 800 cubic meters.  

Characteristic of the heater : - Variable power from 17kW to 33KW 

58045 to 112676   BTU (th)/hour [Btu(th)/h]

- Protection against overheating

- Overflow protection of oil in the furnace 

- Built-in microprocessor controller

 - Traffic lights with LEDs furnace defects

 - Aesthetic cover with powder coating

 - Combustion chamber (3 years warranty*) made of stainless steel  High temperature resistance

- Manual ignition - Warm air outlet temperature 50°C to 70°C  (From the inside air temperature about 12°C)

 - Radiant heat in all directions 

- TURBINE FAN INSIDE TOP COVER !!!- Air flow 1000 cubic m / h

 - Oil consumption 1.7 l / h to 3.3 l / h 

- Tank capacity 50l 

- Weight 80kg Length 85 cm: Width 54 cm : Height 137 cm

* 1  year warranty on the rest of the heater components
THE FLUE KIT NOT INCLUDED .WE SELL IT SEPARATELY.
the heater works properly only with the appropriate chimney flue (4-5 meters minimum with a dedicated cross-section of 150 mm)Attempts to test run it without a chimney usually end with switching on the overflow system so please install the flue kit correctly and only then complain about a defect, not the other way around, because these are usually the rules of physics, heater not work without flue kit and correct draft .
and the flue regulator provided free of charge if you buy our  FLUE KIT.